TP-Link T2500G-10MPS T2500G-10MPSUN V1 Configuration Guide - Page 565

Configuring ACL ACL Configuration View the Rule Table The rules in an ACL are listed in ascending order of configuration time, regardless of their rule IDs. By default, a rule configured earlier is listed before a rule configured later. The switch matches a received packet with the rules in order. When a packet matches a rule, the device stops the match process and performs the action defined in the rule. In the ACL rule table, you can view all the ACLs and their rules. You can also delete an ACL or an ACL rule, or change the matching order if needed. Choose the menu ACL > ACL Config > ACL Summary to load the following page. Figure 2-7 ACL Information 2.1.5 Configuring Policy Policy allows you to further process the matched packets through operations such as mirroring, rate-limiting, redirecting, or changing priority. To configure the policy, follow these steps: 1) Create a policy. 2) Configure the action of the policy Creating a Policy Choose th menu ACL > Policy Config > Policy Create to load the following page. Figure 2-8 Creating a Policy Follow these steps to create a policy: Enter a policy name, then click Apply. Policy Name Enter a Policy Name between 1 and 16 characters. Configuration Guide 538