Toshiba Satellite A35-S209 Satellite A35 Users Guide (PDF) - Page 234

Using Auto Switch

Page 234 highlights

234 Using ConfigFreeTM With Your Computer Using Auto Switch If the wireless mode for the wireless setting is set for 5GHz (802.11a), Quick Connect will change this mode to 2.4GHz (802.11b), and then connect to the projector. The wireless LAN configuration will return to the default settings under the following conditions: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this will disconnect the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device. ❖ If you close ConfigFree. Using Auto Switch The Auto Switch feature contains options for automatically switching network devices and profiles if a network connection should fail. ❖ Auto Switch (Cable Disconnect) - This option automatically switches network devices if a wired network cable is disconnected. For more information, see "Auto Switch (Cable Disconnect)" on page 235. ❖ Auto Switch (SSID) - If your notebook computer is connected to a wireless LAN network, ConfigFree automatically switches profiles if a network failure occurs. For more information, see "Auto Switch (SSID)" on page 235. A message appears each time the Auto Switch feature is applied. You then have the option of disabling the Auto Switch option for future use.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261

234
Using ConfigFree
TM
With Your Computer
Using Auto Switch
If the wireless mode for the wireless setting is set for 5GHz
(802.11a), Quick Connect will change this mode to 2.4GHz
(802.11b), and then connect to the projector.
The wireless LAN configuration will return to the default
settings under the following conditions:
If the Toshiba Wireless Projector utility is closed.
If you select Toshiba Wireless Projector (DPJ) from the
ConfigFree tray menu (this will disconnect the wireless
LAN connection).
If you select a profile from the ConfigFree tray menu or
when you disable a wireless device.
If you close ConfigFree.
Using Auto Switch
The Auto Switch feature contains options for automatically
switching network devices and profiles if a network
connection should fail.
Auto Switch (Cable Disconnect)
— This option
automatically switches network devices if a wired
network cable is disconnected. For more information, see
“Auto Switch (Cable Disconnect)” on page 235
.
Auto Switch (SSID)
— If your notebook computer is
connected to a wireless LAN network, ConfigFree
automatically switches profiles if a network failure
occurs. For more information, see
“Auto Switch (SSID)”
on page 235
.
A message appears each time the Auto Switch feature is
applied. You then have the option of disabling the Auto
Switch option for future use.