Toshiba Tecra TE2300 User Guide - Page 148
Using a PS/2 mouse simultaneously with AccuPoint II, Under Pointing Devices Options, select one
View all Toshiba Tecra TE2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
148 Expansion Options Using a mouse Using a PS/2 mouse simultaneously with AccuPoint II When you connect a PS/2-compatible mouse to the PS/2 port, you may use the mouse, the AccuPoint II, or both: When connecting any PS/2 device, turn off your computer to prevent any possible hardware damage. NOTE If you connect a PS/2 mouse to the computer while it is in Standby mode, you will not be able to use the mouse when you turn the computer on. 1 Click Start, Control Panel, then Printers and Other Hardware. 2 Click the Toshiba HWSetup icon. 3 Select the Pointing Devices tab. 4 Under Pointing Devices Options, select one: ❖ Auto-selected - configures the PS/2 mouse to work when it is connected at power on, or the AccuPoint II to work otherwise. Auto-selected is normally the default option. ❖ Simultaneous - configures both the AccuPoint II mouse and PS/2 mouse to work with the computer at the same time. You must reboot the computer for the settings to take effect. HINT: When Auto-selected is the default, the computer can not detect a PS/2 mouse if you connect it after booting the computer. This can be changed in Toshiba Hardware Setup.