Toshiba Tecra TE2300 User Guide - Page 66
Installing a memory module, Close the display panel and remove any cables you may
View all Toshiba Tecra TE2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
66 Connecting Other External Devices Installing a memory module Additional memory modules can be installed in the memory expansion slots on the base of the computer. You will need a standard Phillips no. 1 screwdriver for this procedure. Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost. To avoid damaging the computer's screws, use a standard Phillips no. 1 screwdriver that is in good condition. The computer has two memory expansion slots - Slot A and Slot B. You can install one or two memory modules. 1 Shut down your computer completely using the Shut Down command. See "Powering down the computer" on page 101. 2 Unplug the computer. Installing a memory module with the computer's power on may damage the computer, the module, or both. 3 Close the display panel and remove any cables you may have connected. 4 Turn the computer upside down. 5 Locate and remove the screws that hold the cover plate in place, and lift the cover off of the memory module bay.