Xerox C2424 Service Manual - Page 135
Xerox C2424 - WorkCentre Color Solid Ink Manual
UPC - 095205676532
View all Xerox C2424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
37,027.45: PEST - X-axis motor disconnect. The X-axis motor is not drawing the expected power from the supply (both phases). 37,028.46: PEST - X-axis motor disconnect. The X-axis motor (first phase) is not drawing the expected power from the supply. 37,029.47: PEST - X-axis motor short. The X-axis motor is drawing too much power from the supply (first phase). 37,030.48: PEST - X-axis motor disconnect. The X-axis motor (second phase) is not drawing the expected power from the supply. 37,031.40: PEST - X-axis motor short. The X-axis motor is drawing too much power from the supply (second phase). Troubleshooting Procedure Step Questions and Actions Yes No 1 1. Run the X-axis Drive test. 2. Did the test pass? Replace the electronics module. Go to Step 2. 2 1. Check the X- axis motor wiring for damage. Replace the X-axis motor. 37,032.41: PEST - Y-axis motor disconnect. The Y-axis motor is not drawing the expected power from the supply. 37,033.42: PEST - Y-axis motor short. The Y-axis motor is drawing too much power from the supply. Troubleshooting Procedure Step Questions and Actions Yes No 1 1. Remove any obstructions interfering with drum rotation. Complete. 2. Inspect the drum and ensure the drum rotates smoothly, if not replace the drum and retest. 3. Did this correct the problem? Go to Step 2. 2 1. Disconnect the Y-axis belt. 2. Does the Y-motor shaft rotate smoothly? Go to Step 3. Replace the Y-axis motor. 3 1. Reconnect the Y-axis belt. 2. Run the Y-axis Motor test. 3. Did the test pass? Replace the electronics module. Go to Step 4. 4 1. Check the wiring for damage. Replace the Y-axis motor. Error Messages and Codes 3-43