Xerox C2424 Service Manual - Page 248
Scanner Image Quality Problems, Dark Streaks on the Copied Image, Copied Image is Skewed
UPC - 095205676532
View all Xerox C2424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Scanner Image Quality Problems Dark Streaks on the Copied Image Step Questions and Actions Yes 1 1. Reseat the cable connection from the Complete. scanner assembly to the electronics module. 2. Clean the CVT window and platen glass. 3. Scan another page. 4. Did this correct the problem? 2 1. Perform the calibration procedure found on Complete. page 6-9. 2. Did this correct the problem? No Go to Step 2. Replace the scanner assembly. Copied Image is Skewed Step Questions and Actions Yes 1 1. See the "Media System Skew Specification Complete. (IIT/IOT)" on page 1-20. 2. Is the skew within specification? 2 1. Perform the "Manual DADF to Scanner Calibration" on page 6-9. 2. Did this correct the problem? Complete. No Go to Step 2. Replace the scanner assembly. Copied Image is Lighter/Darker than the Original Step Questions and Actions Yes 1 1. Ensure supported media is being used. Complete. 2. Check and/or adjust the control panel copy settings. NOTE: Print the Troubleshooting Print Quality information page from the control panel and review Output Quality and Color Settings section to aid in adjusting copy settings. 1. Does adjusting the copy settings correct the problem? 2 1. Perform the "Manual DADF to Scanner Calibration" on page 6-9. 2. Did this correct the problem? Complete. No Go to Step 2. Replace the scanner assembly. 5-8 WorkCentre C2424 Service Manual