Xerox XDM5205DWU User Guide - Page 113
Setting Up Your Scanner to Work With PaperPort, TWAIN: Xerox DocuMate 520, WIA: Xerox, DocuMate 520
UPC - 785414106011
View all Xerox XDM5205DWU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Scanning with the TWAIN Interface from PaperPort Setting Up Your Scanner to Work With PaperPort When you selected a scanning option from the Scanner drop-down list, such as TWAIN: Xerox DocuMate 520, WIA: Xerox DocuMate 520, or ISIS: Xerox DocuMate 520, the Scan button at the bottom of the panel should become active. If it doesn't, you need to set up your scanner to work with PaperPort. If this Scan button is not active, you need to set up your scanner. NOTE: Setting up your scanner is a one-time-only process for each option from the Scanner drop-down list. Therefore, you may have to set up your scanner once each for TWAIN: Xerox DocuMate 520, WIA: Xerox DocuMate 520, and ISIS: Xerox DocuMate 520. The setup process, described below, is the same for each option. You will not have to set up the scanner again for an option unless you uninstall the scanner and PaperPort software, then re-install them. 108 DocuMate 520 Scanner User's Guide