Yamaha CLP-611 Owner's Manual - Page 38
F11.Damper Number of damper-pedal levels, F12.CancelVol Volume of muted piano-song track, F13.
![]() |
View all Yamaha CLP-611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
F11.Damper (Number of damper-pedal levels) Under normal settings, the length of the damper pedal's sustain effect varies according to how far you displace the pedal - the harder you step down, the longer the notes are held. You use function F11 to set the number of discrete displacement levels recognized by the Clavinova. You may find this feature useful during recording: setting the value to "2" (pedal ON/OFF only) can reduce the amount of data generated by pedal action, allowing you to record a longer series of notes. 1 To access this item, enter FUNCTION mode and go to main function F11. 1 2 ROOM NORMAL MEDIUM BRILLIANCE REVERB EFFECT TOUCH TEMPO 2 Press [-/NO] or [+/YES] to change the setting. Values: 2, 8, 128 (levels) Default: 8 F12.CancelVol (Volume of muted piano-song track) When playing one of the Clavinova's 30 built-in piano songs, you can elect to switch off either part (left-hand or right-hand) so that you can practice along. Under default settings, the Clavinova continues to play back the deselected part at a low volume to serve as a practice guide. You can use the F12 setting to make this playback louder or softer, or to switch it off entirely. 1 To access this setting, enter FUNCTION mode and go to main function F12. 1 2 ROOM NORMAL MEDIUM BRILLIANCE REVERB EFFECT TOUCH TEMPO 2 Press [-/NO] or [+/YES] to change the setting. Values: 0,...,20 Default: 5 1 To access these settings, enter [FUNCTION] mode and go to main function F13. 1 2 ROOM NORMAL MEDIUM BRILLIANCE REVERB EFFECT TOUCH TEMPO 2 Next, press [+/YES] to enter the subfunction group. Then use [t], [s] to move among the different subfunctions, and [-/NO], [+/YES] to set the values. Subfunctions 13.1 TxCh. (MIDI transmitting channel) Values: 1,...,16; OFF Default: 1 Selects the channel the Clavinova uses to transmit performance-related messages to external MIDI devices. (Only devices set to receive on this channel will respond to these messages.) • For DUAL and SPLIT mode play... If TxCh is set to any value other than OFF, the Clavinova will always use Channel 2 to transmit data from Voice 2 (in DUAL mode) or from the left zone (in SPLIT mode). If the setting is OFF, the Clavinova will not transmit any data for either voice. • The Clavinova does not transmit data for demo songs, piano songs, and recorded performances. 13.2 RxCH. (MIDI receiving channel) Values: ALL; 1&2; 1,...,16 Default: ALL Selects the channel the Clavinova uses to receive performancerelated messages from external MIDI devices. The Clavinova will not recognize any messages received over non-selected channels. • If setting is ALL The Clavinova operates as a multitimbral playback device, responding indepently to messages over all channels. This setting is ideal when you want to use a sequencer to drive a multivoice arrangement. • If setting is 1&2 The Clavinova responds to messages received over channels 1 and 2 only. • Panel settings and keyboard play are not affected by received MIDI data (with the exception of MIDI data for reverb type, reverb depth, and effect type). • The Clavinova does not receive MIDI messages when operating in DEMO/PIANO SONG mode. F13.MIDIFunc. (MIDI settings) This function sets up the various MIDI parameters. For general information about your Clavinova's MIDI support, refer to "MIDI Data Format" on page 48. 34 CLP-811/611 Configuration Functions (FUNCTION mode)
![](/manual_guide/products/yamaha-clp811-owners-manual-638579e/38.png)