Yamaha CLP-611 Owner's Manual - Page 6
Music Stand, Key Cover
View all Yamaha CLP-611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Ready Music Stand CLP-811 To raise the stand: 1. Using two hands, take hold of the left and right sides of the music stand. Lift the stand upwards while at the same time rotating the top of the stand toward you. 2. Push the stand down into place so that the opening on the base of the stand fits onto the small notch on the plastic hook. To retract the stand: Lift the stand straight up off the notch, then rotate it backwards and return it to its original position. CLP-611 To raise the stand: 1. Lift the stand forward as far as it will go. 2. Flip down the two metal supports at the bottom rear of the stand. 3. Lower the stand downward slightly so that it comes to rest on the metal supports. To lower the stand: 1. Lean the stand forward as far as it will go. 2. Raise the two metal supports (at the back of the stand) so that they are flush with the stand. 3. Gently lower the stand backward until it is all the way down. NOTE Please do not try to use the stand in half-raised position. When raising or lowering the stand, always hold on to it until it is securely in place. 12 31 2 Key Cover To open the cover: 1. Lift the cover slightly (not too much). 2. Gently slide the cover open. To close the cover: 1. Slide the cover all the way forward, holding it firmly so that it can't drop down. 2. Gently lower the cover over the keys. Be careful of fingers when opening or closing. Hold the cover with both hands when moving it, and do not release it until it is fully opened or closed. Be careful to avoid catching fingers (your and others',) between the cover and the main unit. 2 CLP-811/611 Getting Ready