Yamaha CLP-611 Owner's Manual - Page 7

Powering Up 1. Connect the power cord. Insert one end of the power cord into the power connector on the Clavinova, and the other end into a standard wall outlet. (If your unit comes with a plug adaptor and its use is required, please connect it to the end of the cord before plugging in.) AC INLET The power inlet is located at rear of Clavinova, on the underside of the main unit (directly above the backboard.) 2. Switch on the power. The [POWER] button is located to the left of the keyboard. Press it once to switch the power on. The display comes on, and the power indicator on the front left of the instrument lights up. One or more panel indicators also light up. POWER The power indicator is located on the front side, so that you can tell if power is on even with the key cover closed. ROOM NORMAL MEDIUM BRILLIANCE REVERB EFFECT TOUCH TEMPO MIC. VOL. MIC. MIN MAX PHONES Power indicator CLP-811 To switch the power off, press [POWER] once again. The display and indicators all go off. Adjusting the Volume You adjust the volume by moving the [MASTER VOLUME] slider up or back. Adjust as necessary while playing on the keyboard. Louder MASTER VOLUME MAX The [MASTER VOLUME] slider also controls the output level to the PHONES and AUX OUT jacks. Using Headphones You can connect headphones to either or both of the PHONES jacks. The connection automatically cuts off output from the Clavinova's speakers. Two jacks are provided so that two people can listen at the same time. (Headphones must be purchased separately.) CLP-611 PHONES Softer MIN CLP-811 MIC. VOL. MIC. MIN MAX PHONES Recommended headphones: Yamaha HPE-160 Standard jack for stereo headphones CLP-811/611 Getting Ready 3