Yamaha DTXTREME Owner's Manual (reference Section) - Page 10
Data Control Knobs, EXIT/NO and ENTER/YES Buttons, Sequencer Buttons, KIT=P1, SONG=P1, TEMPO, CLICK - module
View all Yamaha DTXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
REFERENCE SECTION Features of the DTXTREME Data Control Knobs Up to five parameters are shown in the display, and each can be adjusted directly using the knob located under the displayed parameter. For example, in the following display, the tempo is adjusted by turning the knob located under the TEMPO parameter. Turn each knob clockwise to increase the associated value, and counter-clockwise to decrease it. You can largely increase or decrease the value by turning the associated knob while holding down the SHIFT button. KIT=P1 MAPLE SONG=P1 Horizon DRUM TRIGGER MODULE TEMPO BEAT CLICK =107 4/4 SHIFT EXIT/NO and ENTER/YES Buttons Press the EXIT/NO button when you want to exit from any mode. This will take you back to Drum Kit Play mode. If you want to apply a particular setting, press the ENTER/YES button. Also, you can use these buttons when performing or canceling a Store operation. EXIT NO ENTER YES Sequencer Buttons The Start/Stop and Record buttons are used to control the song sequence. Use the CLICK button to switch the metronome on or off. See page 13 for further details. CLICK TAP GROOVE CHECK n Refer to the Owner's Manual Basic Section for details about using the other controls on the front panel, such as the Mute button and Volume sliders. 10