Yamaha DTXTREME Owner's Manual (reference Section) - Page 39
FootCtrl2] Foot Controller 2, FootSw1] Foot Switch 1, HiHat, click, bypas, SStop, BD Hi-hat, bass drum - 111
View all Yamaha DTXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
REFERENCE SECTION Drum Kit Trigger Edit Mode [FootCtrl2] Foot Controller 2 Specify the MIDI message type and channel transmitted by the foot controller connected to the HI-HAT CONTROL jack on the rear panel. If the "Func" parameter in the [FootCtl1] page has been set to "MIDI," the MIDI control message specified here is transmitted. [FootCtl2] HHInput MIDI IN8 10ch 1 2 Type Ctl 7 3 1 HHInput (Hi-hat Input) Select the input to be used for a hi-hat. If the "Func" parameters in the [Foot Ctl1] and [FootSw1] pages have been set to "HiHat," the trigger input for the hi-hat is set here. ❏Settings: none, IN1 - IN16 2 MIDI (Transmit Channel) Set the MIDI channel used to transmit data generated by the foot controller. ❏Settings: MIDI channel: 1 - 16 3 Type Set the type of MIDI control message that the foot controller will transmit. ❏Settings: Ctl0 - Ctl119 (Controller number), A/T (Aftertouch), P/B up (Pitch Bend Up), P/Bdwn (Pitch Bend Down) [FootSw1] Foot Switch 1 Set up the footswitch connected to the FOOT SW jack on the rear panel. Also set the MIDI channel and controller number if it is as a MIDI controller. [FootSw1] Func Velocity MIDI HiHat 111 ---- 1 2 3 Type ------ 4 1 Func (Function) Set the foot controller function. The following functions are available. HiHat: Acts as a hi-hat controller (switching between open and closed positions). With this setting selected, you can also set the Velocity parameter in this screen. click: Enables or disabled the click. inc: Increments the Drum Kit number in Drum Kit mode, and the step number in Chain mode. dec: Decrements the Drum Kit number in Drum Kit mode, and the step number in Chain mode. bypas: Enables or disables all trigger inputs. SStop: Starts or stops the main song. MIDI: Outputs MIDI channel messages (control change). With this setting selected, you can also set the MIDI and Type parameters in this screen. HH ➝ BD (Hi-hat ➝ bass drum): Generates a trigger signal for the trigger input 9 (KICK) when the footswitch is pressed. With this setting selected, you can also set the Velocity parameter in this screen. ❏Settings: HiHat, click, inc, dec, bypas, SStop, MIDI, HH ➝ BD 2 Velocity Set the velocity value output for a trigger signal when the "Func," "HiHat" and "HH ➝ BD" settings have been selected. ❏Settings: 1 - 127 39