Yamaha DTXTREME Owner's Manual (reference Section) - Page 49
VoiceCopy] VOICE COPY, stereo, InsFx1, IND1&2, 3&4
View all Yamaha DTXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
REFERENCE SECTION Drum Kit Voice Edit Mode 2 Output Specify the output routing of the audio signal for the voice you have chosen. When routed to an Individual Output, the voice signal will not be routed to Insertion Effects. stereo: output to OUTPUT L and R. InsFx1, InsFx2: routed to the specified Insertion Effect (1 or 2). Final output routing is determined by the Insertion Effect settings. IND1&2, 3&4, 5&6: stereo-output to the specified pair of Individual Outputs. IND1, 2, ... 6: mono-output to the specified Individual Output. ❏Settings: stereo, InsFx1, InsFx2, IND1&2, IND3&4, IND5&6, IND 1, IND 2, ... IND 6, thru (see NOTE below) n When the Localizer is enabled (on) with effects settings (page 54), Insertion Effects become automatically unavailable. In that situation, the Output value "InsFx1" and "InsFx2" will be replaced with "thru." When "thru" is chosen for a voice's output, the Localizer does not affect the sound of that voice. 3 RevSend For the voice you have chosen, set the send level to the reverb effect (system effect). ❏Settings: 0 - 127 4 ChoSend For the voice you have chosen, set the send level to the chorus effect (system effect). ❏Settings: 0 - 127 n Each voice's final send level to a system effect is associated with the master send level (RevSend or ChoSend) in the [Effect Setup] (page 53). The final send level is given by multiplying the send level in the [VOICE6] page by the send level in the [Effect Setup] page. [VoiceCopy] VOICE COPY You can copy all voice parameters' values for a specific MIDI note number (voice) in the current drum kit, to a MIDI note number in another drum kit. [VoiceCopy] Note Kit note from 49C# 2to current 49C#2 1 2 3 1 (from) Note Specify the source note number (of the current drum kit) to be copied. Each note number has a specific note name (shown in the LCD) as found in the [VOICE1] page. ❏Settings: 13C#-1 - 94A#5 2 (to) Kit Specify a destination drum kit to copy to. The value "current" means the drum kit you are editing now. ❏Settings: current, U1-U40 3 (to) Note Specify the note number of the destination. Each note number has a specific note name (shown in the LCD) as found in the [VOICE1] page. ❏Settings: 13C#-1 - 94A#5 Procedure 1. Specify the source to copy by selecting a MIDI note number (drum pad) of the current drum kit, and then specify the destination by selecting a drum kit and a note number (drum pad) included in that kit. 2. Press the ENTER/YES button. The LCD display will show "Are you sure?" for confirmation. 3. Press the ENTER/YES button a second time to execute the copy. To cancel copying, press the EXIT/NO button instead. If you cancel the copy operation, you will return to Drum Kit Play mode. 49