Yamaha DTXTREME Owner's Manual (reference Section) - Page 28

REFERENCE SECTION Drum Kit Trigger Edit Mode [TrgSens2] Trigger Sense 2 Set the Level range and Velocity range for each input. The Level range defines the maximum and minimum input level. The Velocity range defines the output range of the Velocity values according to the Level range. Together, these settings define how loud the sound is when the pad is hit with a certain strength (input level). Input level (%) [TrgSens2] Level(100%) Input=16 20% to 100% 1 Minimum Maximum level level 2 Input velocity Velocity(127) 32 to 127 Minimum Maximum velocity velocity 3 1 Input= Select the trigger input. ❏Settings: 1 - 16 n If the Learn parameter in the [UT 5] page in Utility mode has been set to "always," you can select the trigger input by hitting the corresponding pad. See page 73 for details of the Learn parameter. 2 Level Set the maximum and minimum input levels for each input. Velocity values are output according to these settings. If the input signal exceeds the maximum level set here, the maximum velocity (as set in the Velocity parameter, explained below) is output. If the input signal is below the minimum level, no sound is output. When you hit a pad, the input level is displayed as a percentage to the right of the Level. ❏Settings: Minimum level: 0 - 99 Maximum level: 1- 100 n See the following column for an explanation of the relationship between input level and velocity. 3 Velocity Set the maximum and minimum velocity values for each input. These settings are used together with the maximum and minimum Level settings to determine how loud each sound is output. When you hit a pad, the output velocity value is displayed to the right of the Velocity. If, for example, you set a high minimum velocity, the sound will be loud even if you hit the pad gently. Note, however, that this will reduce the dynamic range and therefore the expressiveness of the sound. n See the following column for an explanation of the relationship between input level and velocity. ❏Settings: Minimum velocity: 0- 126 Maximum velocity: 1 - 127 Relationship Between Velocity Curve, Input Level and Velocity Ex. 1 In this illustration, velocity values are output for input levels between 12% and 99%. For an input level of 12%, the velocity is 001. For an input level of 99%, the velocity is 127. velocity 127 001 12% 99% Ex. 2 In this illustration, velocity values are output for input levels between 50% and 99%. For an input level of 50%, the velocity is 064. For an input level of 99%, the velocity is 127. No sound is produced with the "0" velocity value that is output by input levels between 00% and 49%. velocity 127 064 001 50% 99% 0 - 49% No sound is output 28