Yamaha DTXTREME Owner's Manual (reference Section) - Page 36
TrgRim] Trigger Rim, single, withpad, mute hi, variable, fix1 - fix127
View all Yamaha DTXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
REFERENCE SECTION Drum Kit Trigger Edit Mode [TrgRim] Trigger Rim Set the Rim Key On mode and Rim Velocity parameters for each input. [TrgRim] RimKeyOn RimVel HoldGrp Input=16 withpad fix127 16 1 2 3 4 1 Input= Select the trigger input. ❏Settings: 1 - 16 n If the Learn parameter in the [UT 5] page in Utility mode has been set to "always," you can select the trigger input by hitting the corresponding pad. See page 93 for details of the Learn parameter. 2 RimKeyOn (Rim Key On Mode) Set the Rim Key On mode, defining the way in which the sound is played when you hit the rim of a pad. Use "single" mode for rimshot or similar voices, "hold" mode for sustaining voice, and "withpad" mode when playing rimshot-type and pad voices simultaneously. single: Normal playback of the voice set for rimshot. hold: The voice set for rimshot is played back sustained when you hit the rim of a pad. When you hit it again, the sustained playback is stopped. withpad: The voice set for rimshot is played back simultaneously with the pad voice when you hit a pad. ❏Settings: single, hold, withpad 3 RimVel (Rim Velocity) Set the velocity when you hit the rim of a pad. As explained below, the velocity output can be fixed or variable according to the strength with which you hit the pad. mute hi: When you hit the rim of a pad, the velocity that is output is dependent on the Velocity Curve in [TrgSens1] and the Level Range and Velocity Range in [TrgSens2]. Since the muting sensitivity is set to a higher level with this setting, you can mute a sustained sound with a small trigger input level generated at the rim. Appropriate for cymbal pads. mute lo: Same as "mute hi" but the muting sensitivity is set to a lower level. So if you want to use just the muting feature, use the "mute hi" setting. If you want to hit the rim while without disabling muting, use the "mute lo" setting. variable: The velocity that is output is dependent on how hard you hit the pad, and also on the Velocity Curve in [TrgSens1] and the Level Range and Velocity Range in [TrgSens2]. fix1 - fix127: Regardless of how hard you hit the pad, the velocity is always output at this fixed level. However, you will be unable to use muting. Also, these settings allow more responsive triggering than "mute hi" or "mute lo". ❏Settings: Rim velocity: mute hi, mute lo, variable, fix1 fix127 4 Hold Grp (Hold Group) Set the Hold Group for multiple trigger inputs that are assigned "hold" in the RimKeyOn parameter. The Hold Group setting allows only a single pad to play notes at any given time. If you set the same group number to multiple trigger inputs, hitting a pad from that group will mute notes triggered by other pads in the same group. It is useful to prevent an unnecessary stack of notes. ❏Settings: off, 1 - 32 36