Yamaha DTXTREME Owner's Manual (reference Section) - Page 72
System, Ut 4] Tg2, Ut 5] System 1 - 3 manual
View all Yamaha DTXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
3 Swap L/R Reverse the left and right positions of the drum voices. off: Position are normal. on: Positions are reversed. ❏Settings: off, on 4 RevBypas Enable or disable bypassing the reverb unit. If bypassed, all audio outputs will not be applied the reverb effect (system effect). off: System reverb effect is available. on: System reverb effect is unavailable. ❏Settings: off, on n Every time you turn the DTXTREME on, this parameter is automatically set to "on." [UT 4] TG2 Set the individual output parameters here. [UT 4] TG IndivOut Slider manual RevSend 1 2 1 IndivOut Set the signals sent to the INDIVIDUAL OUTPUT jacks. manual: Output routing for each MIDI note number (voice) is specified with the Output parameter in the [Voice6] page in Drum Kit Voice Edit mode. auto: The SNARE, KICK, TOM, HI-HAT, CYMBAL, MISC are sent respectively to Individual Outputs 1 to 6. However, if the Insertion Effects are applied, their settings determine the output routing for each voice. ❏Settings: manual, auto 2 Slider Set what is controlled by moving the panel slider (SNARE, KICK, TOM, HI-HAT, CYMBAL or MISC) while holding down the SHIFT button. RevSend: Reverb send level of each part. indiv: Output volume levels of Individual Outputs 1-6 (1: SNARE, 2: KICK, 3: TOM, 4: HIHAT, 5: CYMBAL, 6: MISC). ❏Settings: RevSend, indiv SYSTEM Set the system-wide settings of the DTXTREME, including display, triggering, factory setting and so on. [UT 5] SYSTEM 1 In this page, you can choose the LED indication and Individual Output settings. The available parameters are as follows. [UT 5] LEDdisp Learn JumpRecent SYSTEM drumkit always off 1 2 3 1 LEDdisp Choose the message shown in the LED. drumkit: Shows the current drum kit number. tempo: Shows the current tempo. ❏Settings: drumkit, tempo REFERENCE SECTION Utility Mode 72