Yamaha DTXTREME Owner's Manual (reference Section) - Page 50
MIDI Parameters, MIDI1] MIDI SETUP1
View all Yamaha DTXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
REFERENCE SECTION Drum Kit Voice Edit Mode MIDI Parameters You can specify for each MIDI channel whether to enable the sending of MIDI messages, output values for program changes, control changes, and so on. [MIDI1] MIDI SETUP1 Specify up to 16 program change messages that will be sent out when you switch from the current drum kit to another. This is very useful when selecting several programs at a time on the DTXTREME tone generator as well as external MIDI devices under the control of the DTXREME. Program changes specified here will be sent to the DTXTREME tone generator and output from MIDI OUT except when the MIDI channel is set to "10," the basic channel of the drum kit. If the MIDI channel is set to "10," the specified program change message is only output from MIDI OUT and does not affect the drum kit itself. [MIDI1] Transmit PC# Ch=10 on 001 1 2 3 BankMSB BankLSB 000 000 4 5 1 Ch= (Target Channel) Specify the MIDI channel for sending a MIDI message. ❏Settings: 1 - 16 n First select a MIDI channel here, and then set the contents to send out on that channel using the following parameters. Repeat this procedure for each channel (1 - 16) as necessary. 2 Transmit Enable or disable outputting MIDI messages on the specified channel. When this parameter is set to "on," MIDI transmission (to MIDI OUT and DTXTREME tone generator) on the specified channel is enabled. Setting "off" disables all MIDI transmissions on that channel and any following MIDI parameters become unavailable. ❏Settings: on, off 3 PC# (Program Change) Specify a program number you want to output when switching from the current drum kit to another. By simply selecting another drum kit on the DTXTREME, you can conveniently change programs on other MIDI devices including synthesizers. Also notice you can set up to 16 program changes for each drum kit. ❏Settings: 001 - 128 4 BankMSB (Bank Select MSB) Combined with the BankLSB parameter, you can output a bank select message when switching from the current drum kit to another. This is especially useful when selecting voices in banks on a tone generator with multiple sound (voice) banks. Combine this parameter with the PC# and BankLSB parameters to specify a sound from a specific bank of a MIDI device that is set to a specific (current) MIDI channel. You can set a bank select message for each MIDI channel. ❏Settings: 000 - 127 5 BankLSB (Bank Select LSB) Combined with the BankMSB parameter, you can output a bank select message when switching from the current drum kit to another. This is especially useful when selecting voices in banks on a tone generator with multiple sound (voice) banks. Combine this parameter with the PC# and BankMSB parameters to specify a sound from a specific bank of a MIDI device that is set to a specific (current) MIDI channel. You can set a bank select message for each MIDI channel. ❏Settings: 000 - 127 50