Yamaha DTXTREME Owner's Manual (reference Section) - Page 43

REFERENCE SECTION Drum Kit Voice Edit Mode Entering Drum Kit Voice Edit Mode Press the VOICE button. VOICE [Voice1] Type Voice 42* Volume Tuning 38 D1 AcSnr1 MCA55 110 - 1.00 n Before entering Drum Kit Voice Edit mode, select the drum kit you want to edit. When editing, you can confirm the current drum kit number by viewing the LED. n If the JumpRecnt parameter in the [UT 5] page in Utility mode has been set to "on," you will have the last edit page you were working in when you enter the edit mode. If this parameter has been set to "off," you will have the first edit page. See page 73 for details of the JumpRecnt parameter. Edit Pages and Basic Operations in Drum Kit Voice Edit Mode This mode has 10 edit pages. These edit pages contain voice parameters for each MIDI note number and MIDI parameters for each MIDI channel. 1. Select an edit page using the page w and v buttons and find which page contains the parameter you want to edit. 2. Select a MIDI note number (13 to 94) to start editing any voice parameter (see below); In a voice parameter page, you need to first specify the MIDI note number (drum pad) to edit the voice attached to that note number (drum pad). To easily specify the note number, you can set the Learn parameter to "always" in the [UT 5] page in Utility mode (page 73). Each time you hit a drum pad, you can interactively specify its corresponding note number in the edit page. [Voice1] Type Voice 42* Volume Tuning 38 D1 AcSnr1 MCA55 110 - 1.00 n You don't need to specify the note number when you edit a MIDI parameter. 3. Enter the value using the Data Control knob assigned to your desired parameter. [Voice1] Type Voice 42* Volume Tuning 38 D1 AcSnr1 MCA55 110 - 1.00 n Turning the Data Control knob while holding down the SHIFT button helps largely increasing or decreasing the value. n You can monitor the voice that is being edited by pressing the Sound button. 4. Adjust any necessary parameters repeating steps 1 to 3 above. 43