Yamaha DTXTREME Owner's Manual (reference Section) - Page 32

REFERENCE SECTION Drum Kit Trigger Edit Mode 2 Note Select from 9 numbers (1st to 9th), mute or rim. MIDI note numbers (Note#) are assigned to the numbers or parameters selected here. n Select "mute" to assign a note number to the voice that is played when you hit a pad while holding down the rim switch. The other (up to 9) voices will be muted when you hit a pad with the rim switch held down. n Select "rim" to assign a note number to the voice that is played when you hit the rim of a pad. n When the trigger input "1" (Input=1) is selected and the pad type (Type) for the input is assigned to "RH" (page 26), the "edge" appears instead of the "mute." The "edge" is provided for position sensing by the RHP120SD pad. n When the trigger input "8" (Input=8) is selected, since this input is for hi-hat control (HH Ctrl), the five hi-hat notes (open, clse, fcls, spls, rim) are available instead of 1st to 9th notes. open: When you hit a pad while the hi-hat pecal is open. clse: When you hit a pad while the hi-hat pecal is closed. fcls: When changing the hi-hat pedal position from open to closed. spls: When changing the hi-hat pedal position from closed to open. rim: When hitting the rim of a pad. n Assignment of drum voices to MIDI note numbers are set in Drum Kit Voice Edit mode (page 44). ❏Settings: Note: 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th, 9th, mute or edge, rim or open, clse, fcls, spls, rim 3 Note# (MIDI Note Number) Assign MIDI note numbers for the 9 numbers (1st to 9th), mute and rim for the currently selected input. Since the note number is displayed with its note name (key and octave), both will change accordingly as you turn the associated Data Control knob to select the note number. If a ✽ is displayed to the left of the note number, this means that the same note number has been assigned elsewhere. Note numbers below 13C#1 or above 94A#5 cannot be assigned. These note numbers will be shown in parentheses. ❏Settings: off, (1C#-2 - 12C-1), 13C#-1 - 94A#5, (95B5 127G8), skip (when Key On mode is set to "alter") n MIDI note numbers are used to specify the pitch of a voice. Middle C, for example, is note number 60. Yamaha specifies notes by their key and octave, such as C3 for middle C. So the C above C3 is C4 and the note number is 72. This is makes things easier trying to play notes on an external tone generator. C0 C1 C2 C3 C4 C5 C6 C7 MIDI Note 0 24 36 48 60 72 84 96 108 127 Number n With the Mode (Key On mode) parameter set to "alter" in the [TrgMIDI1] page, setting "off" to any numbered note number (Note#) will finish programming notes at that point. If you set "off" to 4th note number, for example, you can play 1st to 3rd notes in order with first three hits of a pad, and the next hit will play 1st note again and so on. n With the Mode (Key On mode) parameter set to "alter" in the [TrgMIDI1] page, you can set "skip" to any numbered note number (Note#). You can use "skip" as a rest that produces no sound when hitting a pad. For example, if you set "skip" to every second note numbers, you can play them in 4 beats even while hitting a pad in 8 beats. 32