Yamaha ELS-02 Owner's Manual - Page 15
Adjusting parameter values by using the display sliders, To open the parameter list
View all Yamaha ELS-02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Quick Introductory Guide To open the parameter list: Using the LCD Display Touching the display slider directly: 1 To change a display slider value, press the desired point in the slider. The slider moves to the point that is pressed. You can also change the parameter value by sliding your finger up or down while holding down on the display slider. Slider will move to the point you touch When you press a button, a parameter list will appear in which you can select the desired parameter. When you select items in the display, the list closes automatically. You can also close the list by pressing the [CLOSE] button at the top right of the list. To change the parameter value: To make coarse changes to the value, use the buttons. For fine adjustment, use the Data Control dial. DATA CONTROL Slider will follow your finger Using the Data Control dial: Touch on/above the slider in the display to enable the parameter and set a rough value, then turn the Data Control dial. Touch here to enable the parameter DATA CONTROL Adjusting parameter values by using the display sliders You can adjust some parameters such as Volume, Reverb, Pan and so on, by using the 'virtual' sliders in the display. There are two ways to move the slider in the display: touching it directly, and using the Data Control dial. We suggest that you touch the display slider when making coarse adjustments and use the Data Control dial for fine adjustment. Blue mark To control Pan, you can move the horizontal slider in the same way as vertical sliders. DATA CONTROL ELS-02/ELS-02C Owner's Manual 15