Yamaha ELS-02 Owner's Manual - Page 195

MIDI Control When you connect your Electone with a second MIDI device (such as a synthesizer or computer), you can determine how the Electone controls that MIDI device, or how the Electone is controlled. 1 Press the [UTILITY] button in the panel to call up the Utility display. 2 Press the [MIDI] button at the top right of the display to call up the MIDI Page.    -1 -2 -3  OUTPUT For setting the channels over which MIDI information will be transmitted. Any channel from 1 through 16 can be assigned to each keyboard (the Upper keyboard, the Lower keyboard and the Pedalboard) as well as the Expression pedal and 2nd Expression pedal. The MIDI messages for each keyboard and Expression pedal will be sent on the channels set here. You must set the transmit channel here to match the receive channel of the connected device. (The ELS-02 does not show the 2nd Expression pedal.) Pressing each OUTPUT button calls up the channel selection pop-up menu. After you select the desired channel, the pop-up menu automatically closes. The Expression pedal and 2nd Expression pedal can be set to "OFF" (MIDI information will not be transmitted). On the 2nd Expression pedal, CC#4 by which MIDI information is output as Second Expression can be also set.  MIDI OUT FILTER Deletes unnecessary MIDI data and keeps it from being transmitted from the Electone. After Touch and Rhythm start/stop are automatically filtered on the ELS-02. In addition, Horizontal Touch and Second Expression are automatically filtered on the ELS-02C. Set the parameter for which you wish to disable transmission to ON. MIDI Control NOTE If you set Second Expression to on in the MIDI OUT FILTER parameters, the setting in the OUTPUT () parameters will be disabled.  INTERNAL/EXTERNAL Switches control over the displayed items between the Electone (INTERNAL) or the connected device (EXTERNAL).  -1 LEAD 1 Determines Internal or External control of the Lead Voices. INT. (Internal): Lead Voice 1 is played from the Upper keyboard of the Electone. (If the To Lower function is on, it is played from the Lower keyboard.) EXT. (External): Lead Voice 1 is played from the connected instrument via MIDI channel 4.  -2 SYNC. To synchronize playback with an external MIDI device, you can use either the instrument's internal clock (INT.) or MIDI clock signals from the external device (EXT.). INT. (Internal): The instrument uses its own internal clock. EXT. (External): The instrument uses MIDI clock signals from the external device (MIDI).  -3 EXPRESSION Determines the control of the expression pedal functions. Ordinarily, this control is set to AUTO. AUTO: Internal and External is automatically switched. INT. (Internal): You can manually control the expression pedal even during MDR playback. EXT. (External): While playing the MDR or receiving MIDI messages, the expression pedal is invalid. (The volume is controlled by the recorded data in a USB flash memory or received MIDI data.) 13 Connections ELS-02/ELS-02C Owner's Manual 195