Yamaha ELS-02 Owner's Manual - Page 50

Using Voice Link Using Voice Link Registering a Voice with the settings on the Voice Condition display to Voice Link You can register the current Voice with the current settings (except for Volume and Brilliance) on the Voice Condition display to the Voice Link category as a Voice. 1 Make the desired settings on the Voice Condition display. Here, set the FEET to "4'." The settings will be registered, then the Voice Link indication (chain link icon) appears at right of the Voice name on the display. This Voice Link indication in the Voice name will be shown also on the Voice Display, enabling you to confirm which Voice Section uses Voice Link. This chain link icon appears when the corresponding Voice is registered as a Voice Link. 2 At the left top on the display, press the [LINK] button. NOTE When the same Voice has already been registered to Voice Link, the [REGISTER] button in step 3 is grayed out and cannot be used. If this occurs, press the [RENAME] button, assign a different name to the current Voice, then register the Voice to Voice Link again. For details, see page 52. If you want to overwrite the current Voice with the same Voice name to Voice Link, see page 51. 3 Press the [REGISTER] button on the display. Selecting a Voice registered to Voice Link 1 Press a User button in the desired Voice Section. UPPER KEYBOARD VOICE 1 STRINGS BRASS WOODWIND TUTTI PAD SYNTH BRILLIANCE VOLUME BRILLIANT MAX 1 PIANO ORGAN PERCUSSION GUITAR CHOIR WORLD 2 MELLOW MIN User buttons 50 ELS-02/ELS-02C Owner's Manual