Yamaha ELS-02 Owner's Manual - Page 156

Rhythm Pattern Program 3 Select the User Rhythm number to which you wish to save. The following display appears, prompting confirmation of the operation. After saving the Rhythm, be sure to quit Rhythm Pattern Program before turning the power off. Turning off the Electone without quitting Rhythm Pattern Program erases the User Rhythm you have created. 4 Press the [SAVE] button to save the pattern, or press [CANCEL] to abort the operation. Checking the Remaining Memory Capacity Remaining Memory (amount of memory available for storing rhythms) is shown on the display as a percentage. Remaining Memory Quitting the Rhythm Pattern Program You can quit the Rhythm Pattern Program from any of its display pages. 1 Press the [PATTERN] button. If a rhythm is playing, it will automatically be stopped. If you leave Rhythm Pattern Program without having edited any patterns, this simply quits the Rhythm Pattern Program. If you have not saved the edited pattern, a message appears, prompting confirmation of the operation. 2 Select [EXIT] to leave Rhythm Pattern Program, or [CANCEL] to abort the operation and return to the previous display. NOTICE When you leave the Rhythm Pattern Program, the square at the top left in the display turns light blue for a few seconds, indicating that data is currently being saved. Do not turn the power off while the data is being saved. If a "Data full" message appears when you press the [SAVE] button, the pattern cannot be saved because of lack of available memory space. If this occurs, check through all fifteen sections for any unnecessary data. After erasing some of the less necessary data, try to save the pattern again. To avoid this, you should periodically check the amount of remaining memory while you are creating your rhythm. Reference pages • Confirming rhythm patterns before saving (page 155) • CLEAR PART (page 144) 156 ELS-02/ELS-02C Owner's Manual