Yamaha MMP1 MMP1 Operation Manual [English] - Page 18
Monitor Matrix screen
View all Yamaha MMP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4. Screens 4-1-4. Monitor Matrix screen This screen is used for routing monitor signals. NOTE • You can use this screen when logged in as an "Administrator" or "Advanced User." • This matrix is set to 40x36 when the MMP1's sample rate is 96 kHz or less, and 20x20 when the MMP1's sample rate being used is higher than 96 kHz. You can change the sample rate in the "MISC" tab of the "Scene" tab on the Settings screen. Monitor Matrix Out Monitor Matrix Out names appear here. Adjust output levels here Monitor Matrix In For selecting input sources, and adjusting the levels of the selected input sources Monitor matrix For turning the Send output from Monitor Matrix In to Out on (green) or off, and setting Send levels Monitor Matrix In Source Type & No For selecting monitor matrix input sources. NOTE The same items can be configured on the "Input Patch" tab on the Patch screen. The Monitor Matrix In input type. Monitor Sources 1-8 will appear as Monitor 1-8, Cue Sources 1-8 as Cue 1-8, and other inputs will be "---" and blank. NOTE You can select the format for Monitor 1-8 and Cue 1-8 in the "Monitor Matrix" tab of the "Scene" tab on the Settings screen. Source Label Trim If the Type is "Monitor" or "Cue," double click to add a name (label). Enter a channel name up to 17 alphanumeric characters and symbols. To insert a line break at any point, simultaneously hold the key and press (Windows), or hold the key and press (Mac). Double click or use the mouse wheel to adjust input levels. Out-of-range values entered will be corrected to the maximum or minimum value allowed. MMP1 Operation Manual 18