Yamaha MMP1 MMP1 Operation Manual [English] - Page 19
Monitor Matrix Out, Monitor matrix
View all Yamaha MMP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Monitor Matrix Out Monitor matrix 4. Screens Name (Label) Trim Displays Monitor Matrix Out names. NOTE • The breakdown of Monitor Matrix Out is based on the format selected in the "Monitor Matrix" tab of the "Scene" tab on the Settings screen. • You can add Monitor Matrix Out names (labels) in the "MISC" tab of the "Scene" tab on the Settings screen. Double click or use the mouse wheel to adjust output levels. Out-of-range values entered will be corrected to the maximum or minimum value allowed. NOTE When the Cue and Studio Speaker format is set to stereo, the same settings will be applied to both L/R. • Click to turn Send on (green) or off. When a cell has been turned on, a signal will be sent from the cell row (the input source) to the cell column (output). • To turn multiple cells on or off at the same time, simultaneously hold down the right mouse button (Windows) or the key (Mac) and then drag and release the button (key). Quick Assign: Criss cross from dragging origin point On: Turns entire dragged area on (green) Off: Turns entire dragged area off • Right click (Windows), or hold down the key and then click (Mac) on a cell that has been turned on (appearing in green) to set Send levels. Out-of-range values entered will be corrected to the maximum or minimum value allowed. • If the input source is the channel strip (Ch 1-8), right click (Windows), or hold down the key and then click (Mac) to select either "Mono," "L," or "R." • If the Monitor Source format has been selected in the "Monitor Matrix" tab of the "Scene" tab on the Settings screen, you cannot set Monitor Sources 1-8 to send to the Main Monitor, Downmix L/R, or Headphone L/R on this screen. Use the "Monitor Control" tab on the Main screen to turn these Send signals on or off (described in detail below). Send signals to the Main Monitor: Use the "Monitor Source" selection button to turn Send on or off. Send signals to Downmix L/R: Use the "Monitor Source" selection button to turn Send on or off. Send signals to Headphone L/R: Set the target to headphone output, and then use the "Monitor Source" selection button to turn Send on or off. MMP1 Operation Manual 19