Yamaha MMP1 MMP1 Operation Manual [English] - Page 55
Set the Speaker Set configuration used., Assign Speaker Set output destinations., Route the Main
View all Yamaha MMP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
6. Set the Speaker Set configuration used. Settings screen - Scene - Speaker Matrix 5. Configuring System Settings 7. Assign Speaker Set output destinations. NOTE • While holding down the right mouse button (Windows) or the key (Mac) on the Source fields, drag up or down on the fields to select several input sources at the same time. • The "Speaker Set" is found in "SPK Matrix Out." Patch screen - Output Patch Speaker Set A is set to "6" and Speaker Set B is set to "2" in order to use the 5.1 monitor speakers and the stereo near field monitor setup introduced in this example. The configured Speaker Set will appear on the Speaker Matrix screen. Assign Speaker Set A 1-6 to Analog Out 1-6 connected to the 5.1 speakers, and assign Speaker Set B1/2 to Analog Out 7/8 connected to the stereo speakers. 8. Route the Main Monitor output to the Speaker Set. NOTE • Assign Main Monitor 1-6 to inputs (Speaker Matrix In), and then click crossover points with Speaker Sets A and B to turn them on to send (displayed in purple). • While holding down the right mouse button (Windows) or the key (Mac) on the Source fields, drag up or down on the fields to select several input sources at the same time. • "Main Monitor 01-06" is found in "Monitor Matrix Out." Speaker Matrix screen Route the Main Monitor 1-6 outputs to Speaker Set A 1-6 and the Main Monitor 1/2 outputs to Speaker Set B 1/2. This will send 5.1 surround sound to Speaker Set A as it appears here, and only the topmost two channels (L/R) to Speaker Set B. MMP1 Operation Manual 55