Yamaha MMP1 MMP1 Operation Manual [English] - Page 51

4-2-5. Editor view - Preference screen This screen is used to configure various MMP1 Controller settings. Add names (labels) to buttons used to select Talkback interrupt destinations Add names (labels) to buttons used to select Speaker Sets 4. Screens Select the control method for the Control view Monitor Level Knob Select how knobs located on each screen are controlled (excluding the Monitor Level Knob) Select the "Talkback Button Behavior" Select whether to show a confirmation message or not when recalling a Scene Shows/hides the status of mics controlled with the Commentary functions on the CH Strip screen Select whether to allow (lock "OFF") or not (lock "ON") changing of the SPL Level Displays connected BLE MIDI device Talkback Label Enter a channel name up to 17 alphanumeric characters and symbols. Speaker Label Enter a channel name up to 17 alphanumeric characters and symbols. Monitor Level Knob Operation Rotary Drag to change the value as you would rotate a knob. Linear Drag up and down or left and right to change a value. Knob Operation Rotary Drag to change the value as you would rotate a knob. Linear Drag up and down or left and right to change a value. Recall Confirmation When turned on (green), a confirmation dialog box will appear when recalling a Scene, and when turned off the Scene will be recalled without a confirmation message. Talkback Button Behavior Latch Toggles between on and off when tapped. Momentary Turns on while being held, and turns off when released. BLE MIDI Device Tap to display the "Select BLE MIDI Device" dialog box for selecting the BLE MIDI device for connection. SPL Level Lock When turned on (green), the SPL Level in "Monitor Control" tab on the Main screen (MMP1 Editor) and in Control view cannot be changed. MMP1 Operation Manual 51