Yamaha MMP1 MMP1 Operation Manual [English] - Page 26

4-1-7c. Correspondence table of assignable audio signals 4. Screens Source Monitor Matrix In Dante In 1-64 Analog In 1-8 Input from the Dante  [PRIMARY]/[SECONDARY] connectors on the MMP1. Input from the ANALOG  [INPUT 1-8] connectors on the MMP1. AES/EBU In 1-16 Input from the [AES/EBU 1-8]/  [AES/EBU 9-16] connectors on the MMP1. CH Strip Out Channel strip output signals.  1-8 CH Strip 1-8 Channel strip Insert Send  Ins Send signals. PFL Bus Out Pre Fader Listen for the  channel strip. AFL Bus Out After Fader Listen for the  channel strip. RTB Bus Out Return Talk Back. Input  signals to the channel strip are output directly without passing through the channel strip. Monitor Matrix Meter Out 1-32 Main Monitor, Cue, Studio Speaker, and AUX signals output to the meter. Downmix Downmix L/R signals output Meter Out L/R to the meter. Headphone Headphone L/R signals Meter Out L/R output to the meter. Monitor Matrix Out 1-32 Signals input to Monitor Matrix Out 1-32. The sources which can be selected depends on the settings under the "Monitor Matrix Out" in the "Monitor Matrix" of the "Scene" tab on the Settings screen. Downmix Out Signals input to Downmix Out L/R L/R. Headphone Out L/R Signals input to Headphone Out L/R. SPK Matrix Out 1-32 Direct SPK Out 1-6 Signals input to Speaker  Matrix Out 1-32. The sources which can be selected depends on the "Speaker Matrix" of the "Scene" tab on the Settings screen. Signals input to Direct  Speaker Send. Oscillator Internal MMP1 oscillator.  Channel Strip In       Speaker Matrix In    Direct Speaker Send    Talkback Mic In  Dante Out Analog Out AES/EBU Out         MMP1 Operation Manual 26