Yamaha MT1X Owner's Manual - Page 12

PHONES SELECT SWITCH, STEREO Position, MONITOR Position, MIX Position

Get Yamaha MT1X PDF manuals and user guides View all Yamaha MT1X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

YouPHcaOnNpElSugSEaLEseCtToSfWheITaCdHphones into the PHONES jack on the front panel to monitor the sound. This switch is used to select the signal to be monitored. Control the volume level with the PHONES volume control STEPRuEtOthePosswititiochn:in this position to monitor the signal output through the ST OUT jacks The Left and Right chan- nels of the stereo signal will be heard through the headphones. When setting to this position during ping-ponging or mixdown operations, the mixed signal of all the instruments can be monitored. MONITOR Position: This position is for monitoring the signal of each track. You can freely monitor while mixing the sound of each track during recording or playback. Using the MONITOR LEVEL Controls and the MONITOR PAN Controls , set the desired level and position for each track. Track MIX Position: This position allows you to simultaneously monitor both the sound heard in the STEREO position and the sound heard in the MONITOR position. Setting to this position during punch-in/punch-out operations will enable the type of monitoring shown below. (Refer to "Punch-in/Punch-out" on page 27). 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
PHONES SELECT SWITCH
You can plug a set of headphones into the PHONES jack
on the front panel to monitor the sound. This switch
is used to select the signal to be monitored. Control the volume level with the PHONES volume control
STEREO Position:
Put the switch in this position to monitor the signal output through the ST OUT jacks
The Left and Right chan-
nels of the stereo signal will be heard through the headphones.
When setting to this position during ping-ponging or mixdown operations, the mixed signal of all the instruments
can be monitored.
MONITOR Position:
This position is for monitoring the signal of each track. You can freely monitor while mixing the sound of each track
during recording or playback. Using the MONITOR LEVEL Controls
and the MONITOR PAN Controls
, set the
desired level and position for each track.
Track
MIX Position:
This position allows you to simultaneously monitor
both the sound heard in the STEREO position and the
sound heard in the MONITOR position. Setting to this
position during punch-in/punch-out operations will
enable the type of monitoring shown below. (Refer to
“Punch-in/Punch-out” on page 27).
10