Yamaha MT1X Owner's Manual - Page 38

SPECIFICATIONS Model Description Mechanical Descriptions Tape Heads Tape speed Pitch control Wow & flutter Fast forward/rewind time Motor Inputs & Outputs INPUT 1-4 AUX RTN L/R ST OUT L/R AUX SEND TAPE OUT 1-4 PHONES Equalizer Characteristics Sound Specifications Total frequency response Total signal to noise ratio Total distortion Channel separation Erasure ratio : multitrack cassette recorder : standard cassette; CrO2 tape only (EQ: 70µs) : hard permalloy 4-channel rec/play head ferrite 4-channel erase head : 4.75 cm/sec : +/-10% : 0.05% WRMS : about 100 seconds (C-60 tape) : DC servo input impedance rated input level minimum input level maximum input level input impedance rated input level output impedance rated impedance load rated output level output impedance rated impedance load rated output level output impedance rated impedance load rated output level rated impedance load maximum output level HIGH LOW : 10k ohms : - 10dB to - 50dB (input fader in specified position) : - 56dB (gain control MAX, input fader MAX) : + 10dB (gain control MIN, headroom margin) : 10k ohms : -10dB : 1k ohms : 10k ohms or over : - 10dB (at 50k ohms) : 1k ohms : 10k ohms or over : - 10dB (at 50k ohms) : 1k ohms : 10k ohms or over : - 10dB (at 50k ohms) : 8-40 ohms : 100mW + 100mW : +/- 10dB (10kHz shelving) : +/- 10dB (100Hz shelving) : 40Hz-12.5kHz, +/- 3dB : 85dB (dbx ON, IHF-A) : less than 1% (EIAJ, 315Hz) : better than 55dB (1 kHz) : better than 70dB General Power supply Power consumption Dimensions (W x H x D) Weight Supplied accessories : supplied AC adaptor (DC 15V), PA11 battery pack ("C" x 10) : 14w : 365mm x 26mm x 225mm (14-1/3" x 2-1/2" x 8-7/8") : 2.5 kg (5.5 Ibs) : carrying strap, PA10 AC adaptor 0dB=0.775Vr.m.s. Specifications subject to change without notice. 36