2003 Ford Explorer Sport Trac Owner Guide 1st Printing (Spanish) - Page 296

Locks and Security The anti-scan feature will turn off after: • one minute of keypad inactivity. • pressing the UNLOCK control on the remote entry transmitter. • the ignition is turned to the ON position. Unlocking and locking the doors using keyless entry To unlock the driver's door, enter the factory set 5-digit code or your personal code. Each number must be pressed within five seconds of each other. The interior lamps will illuminate after pressing the first control on the keypad. To unlock all doors, press the 3 • 4 control within five seconds. To lock all doors, press the 7 • 8 and the 9 • 0 at the same time. You do not need to enter the keypad code first. Note: The interior lamps will turn off. Autolock (if equipped) This feature will automatically lock all the doors when: • all the doors are closed, • the ignition key is in the ON position, • the gearshift lever is shifted into, then out of, R (reverse) and then • the brake pedal is released. This feature will also automatically relock all the doors when: • the ignition is in the ON position and any door is opened then closed, and • you put the vehicle in motion by releasing the brake pedal. Deactivating/reactivating the autolock feature The autolock feature can be deactivated/reactivated using the following two methods: • keyless entry keypad, or • ignition lock cylinder and interior power door locks control. To deactivate/reactivate the autolock feature using the keypad Your vehicle comes with the autolock feature activated. To deactivate/reactivate this feature: 1. Turn the ignition to the OFF position. 66