2003 Ford Explorer Sport Trac Owner Guide 1st Printing (Spanish) - Page 432

Maintenance and Specifications Fluid Ford Part Name Application Windshield washer Motorcraft All fluid Premium Windshield Washer Concentrate Capacity 2.6L (2.7 quarts) 1 Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON௡ and MERCON௡ V are not interchangeable. DO NOT MIX MERCON௡ and MERCON௡ V. Refer to the scheduled maintenance guide to determine the correct service interval. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 3 4 5 2 Fill to bottom of filler plug hole. Add the coolant type originally equipped in your vehicle. Fill to 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of filler plug hole. 6 For vehicles equipped with a conventional rear axle, refer to your scheduled maintenance guide for axle fluid change intervals. Vehicles equipped with Traction-Lok axle require synthetic rear axle lubricant. Rear axles containing synthetic lubricant are lubricated for life. These lubricants are not to be checked or changed unless a leak is suspected or service is required. The axle lubricant should be changed any time the axle has been submerged in water. Add 118 ml (4 oz.) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok axles. 8 Service refill capacity for the manual transmission is determined by filling the transmission to the bottom of the filler hole with the vehicle on a level surface. 7 202