2009 Mazda CX-9 Owner's Manual - Page 20

Essential Safety Equipment Seats Setting the driver's seat to a preprogrammed position There are two methods for setting the driver's seat to a pre-programmed position. For example, the type A method can be used before sitting in the seat and while the driver's door is open, and the type B method can be used after getting in the vehicle with the driver's door closed. TYPE A When the ignition switch in the LOCK position and the driver's door is open, press the programming button 1, 2, or 3 for the desired seating position. NOTE In the following cases, the seat position set function cancels: l Any of the seat adjustment switches are operated. l The set switch is pressed. l A programming button 1, 2, or 3 is pressed. l The vehicle starts moving. l Vehicle locking/unlocking is done using the transmitter. l Vehicle locking/unlocking is done by pressing the request switch while the advanced key is being carried. Operation using the advanced key/ retractable type key With advanced key Lock button Auxiliary key Unlock button With retractable type key Lock button Unlock button TYPE B When the ignition switch the ON position or the driver's door is closed, press and hold the desired programming button 1, 2, or 3. NOTE In the following cases, the seat position set function cancels: l Any of the seat adjustment switches are operated. l The set switch is pressed. l The vehicle starts moving. Programming One seat position can be programmed into each advanced key/retractable type key. After the following conditions have been met, operate the seat and the advanced key/retractable type key to program the seat positions. l The ignition switch in the LOCK position (The auxiliary key/retractable type key is removed from the ignition switch) l The driver's door is open 2-8