2009 Mazda CX-9 Owner's Manual - Page 406

In Case of an Emergency Overheating Overheating If the temperature gauge indicates overheating, the vehicle loses power, or you hear a loud knocking or pinging noise, the engine is probably too hot. 3. Apply the parking brake. 4. Turn off the air conditioner. 5. Check whether coolant or steam is escaping from under the hood or from the engine compartment. If steam is coming from the engine compartment: Don't go near the front of the vehicle. Stop the engine. Wait until the steam dissipates, then open the hood and start the engine. If neither coolant nor steam is escaping: Open the hood and idle the engine until it cools. WARNING Turn off the ignition switch and make sure the fan is not running before attempting to work near the cooling fan: Working near the cooling fan when it is running is dangerous. The fan could continue running indefinitely even if the engine has stopped and the engine compartment temperature is high. You could be hit by the fan and seriously injured. CAUTION If the cooling fan does not operate while the engine is running, the engine temperature will increase. Stop the engine and call an Authorized Mazda Dealer. 6. Make sure the cooling fan is operating, then turn off the engine after the temperature has decreased. 7. When cool, check the coolant level. If it's low, look for coolant leaks from the radiator and hoses. Do not remove either cooling system caps when the engine and radiator are hot: When the engine and radiator are hot, scalding coolant and steam may shoot out under pressure and cause serious injury. Open the hood ONLY after steam is no longer escaping from the engine: Steam from an overheated engine is dangerous. The escaping steam could seriously burn you. If the temperature gauge indicates overheating: 1. Drive safely to the side of the road and park off the right-of-way. 2. Shift into park (P). 7-14