2009 Mazda CX-9 Owner's Manual - Page 275

Interior Comfort Audio System NOTE If you continue to press and hold the button, the frequency will continue changing without stopping. Scan tuning Press the scan button ( ) to automatically sample strong stations. Scanning stops at each station for about 5 seconds. To hold a station, press the scan ) again during this interval. button ( Preset channel tuning The 6 preset channels can be used to store 6 AM and 12 FM stations. 1. To set a channel first select AM, FM1, or FM2. Tune to the desired station. 2. Depress a channel preset button for about 2 seconds until a beep sound is heard. The preset channel number and station frequency will be displayed. The station is now held in the memory. 3. Repeat this operation for the other stations and bands you want to store. To tune one in the memory, select AM, FM1, or FM2 and then press its channel preset button. The station frequency and the channel number will be displayed. NOTE If the power supply is interrupted (fuse blows or the battery is disconnected), the preset channels will be erased. Press and hold the auto memory button ) for about 2 seconds until a beep ( sound is heard; the system will automatically scan and temporarily store up to 6 stations with the strongest frequencies in each selected band in that area. After scanning is completed, the station with the strongest frequency will be tuned and its frequency displayed. Press and release the auto memory button ) to recall stations from the auto( stored stations. One stored station will be selected each time; its frequency and channel number will be displayed. NOTE If no stations can be tuned after scanning operations, "A" will be displayed. Auto memory tuning This is especially useful when driving in an area where the local stations are not known. Additional AM/FM stations can be stored without disturbing the previously set channels. 6-35