2009 Mazda CX-9 Owner's Manual - Page 439
2009 Mazda CX-9 Manual
Page 439 highlights
Maintenance and Care Owner Maintenance 5. Pull it out again. The proper fluid level is marked on the dipstick as follows. Fully insert the dipstick. When adding fluid, inspect with the dipstick to make sure it doesn't pass full. NOTE Full A Low Inspect the fluid on both sides of the dipstick in a well lit area for an accurate reading. Full B Low Fluid hot scale A When the vehicle has been driven and the fluid is at normal operating temperature, about 65°C (150°F), the level must be between Full and Low. Fluid cold scale B When the engine has not been running and the outside temperature is about 20°C (70°F), the fluid level should be close to, but not above, the bottom notch on the dipstick. CAUTION Ø Use the cold scale only as a reference. Ø If outside temperature is lower than about 20°C (70°F), start the engine and inspect the fluid level after the engine reaches operating temperature. Ø If the vehicle has been driven for an extended period at high speeds or in city traffic in hot weather, inspect the level only after stopping the engine and allowing the fluid to cool for 30 minutes. 8-25