2009 Mazda CX-9 Owner's Manual - Page 362

Interior Comfort Bluetooth Hands-Free NOTE Speak a programmed "device tag" within 10 seconds. If more than two devices are to be programmed, they cannot be programmed with the same or similar "device tag". 6. Say: [Beep] "Yes" or "No". 7. When "Yes" is spoken, the procedure proceeds to Step 8. When "No" is spoken, the procedure returns to Step 3. 8. Prompt: "Dialing" 19. Prompt: "Adding XXXXXX - - (Ex. "Stan's device") (Device tag). Is this correct?" 20. Say: [Beep] "Yes" 21. Prompt: "Pairing complete" After a device is registered, the system automatically identifies the device. By activating Bluetooth Hands-Free again, or by activating Bluetooth Hands-Free first after turning the ignition switch from the LOCK to the ACC position, the system reads out a voice guidance, "XXXXXX - - (Ex. "Stan's device") (Device tag) is connected". NOTE (With the navigation system) Device registration can also be done by operating the panel buttons on the navigation unit. Refer to the separate manual "NAVIGATION SYSTEM". qReceiving an Incoming Call 1. Prompt: "Incoming call, press the pickup button to answer". 2. To accept the call, press the pick-up button. To reject the call, press the hang-up button. qHanging Up a Call Press the hang-up button during the call. Beep will confirm that call is ended. qVolume Adjustment Turn the power/volume dial of the audio unit or navigation system to adjust the volume. Turn the power/volume dial to the right to increase volume, to the left to decrease it. Audio unit Navigation system qMaking a Call Using a Telephone Number 1. Activate Bluetooth Hands-Free (page 6-118). 2. Say: [Beep] "Dial" 3. Prompt: "Number, please" 4. Say: [Beep] "XXXXXXXXXXX (Ex. "555-1234") (Telephone number)" 5. Prompt: "Dialing XXXXXXXXXXX (Ex. "555-1234") (Telephone number) is this correct?" 6-122