2012 Nissan Murano Owner's Manual - Page 100
2012 Nissan Murano Manual
Page 100 highlights
CHECKING BULBS GUID-B5546604-D327-4511-B24A-C4F4615F5F1F With all doors closed, apply the parking brake and push the ignition switch to the ON position without starting the engine. The following lights will come on (if so equipped): , or , , , , , The following lights come on briefly and then go off (if so equipped): , or , , , , , , WARNING LIGHTS GUID-39AE13E8-806F-40A7-8C69-3AF4A1790761 All-Wheel Drive (AWD) warning light (AWD models) GUID-2C7F9D36-036A-4856-8580-AE4D2A3CACAA The light comes on when the ignition switch is pushed to ON. It turns off soon after the engine is started. If the AWD system malfunctions, or the diameter of the front and the rear wheels are different, the warning light will either remain illuminated or blink. (See "All-Wheel Drive (AWD)" in the "5. Starting and driving" section.) malfunctioning. If the warning light turns off, you can drive again. - blinks slowly (about once every 2 seconds): Pull off the road in a safe area, and idle the engine. Check that all tire sizes are the same, tire pressure is correct and tires are not worn. . If the warning light is still on after the above operations, have your vehicle checked by a NISSAN dealer as soon as possible. If any light does not come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system checked by a NISSAN dealer. Some indicators and warnings are also displayed on the dot matrix crystal display on the speedometer. (See "Dot matrix liquid crystal display" later in this section.) CAUTION . If the warning light comes on while driving there may be a malfunction in the AWD system. Reduce the vehicle speed and have your vehicle checked by a NISSAN dealer as soon as possible. If the AWD warning light blinks when you are driving: - blinks rapidly (about twice a second): Pull off the road in a safe area, and idle the engine. The driving mode will change to 2WD to prevent the AWD system from or Anti-lock Braking System (ABS) warning light GUID-06CAAC80-C465-4A21-9EB7-C024333BA100 When the ignition switch is in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running, or while driving, it may indicate the ABS is not functioning properly. Have the system checked by a NISSAN dealer. If an ABS malfunction occurs, the anti-lock function is turned off. The brake system then operates normally, but without anti-lock assis- . 2-12 Instruments and controls