2012 Nissan Murano Owner's Manual - Page 352

PUSH-BUTTON IGNITION SWITCH POSITIONS GUID-2DA63785-8ABA-4F35-89C9-8EC5E99D0005 LOCK (Normal parking position) GUID-4B0ADEFB-3415-4B03-963E-0C0C5B8558F4 The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key or with the Intelligent Key inserted in the Intelligent Key port. CAUTION Do not leave the vehicle with the pushbutton ignition switch in ACC or ON positions when the engine is not running for an extended period. This can discharge the battery. EMERGENCY ENGINE SHUT OFF GUID-06748DB5-CB47-498E-AD33-8015C01F2E78 To shut off the engine in an emergency situation while driving, perform the following procedure: . Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or Push and hold the push-button ignition switch for more than 2 seconds. SSD0837 ACC (Accessories) GUID-1142617A-DFBE-4A4C-86B0-2A451772941C This position activates electrical accessories such as the radio, when the engine is not running. ON (NormalGUID-BB4F7743-D4C8-4CD5-B0E0-E2CC0EA06860 operating position) This position turns on the ignition system and electrical accessories. . INTELLIGENT KEY BATTERY DISCHARGE GUID-B0FA47F4-2F8B-42AE-95A0-B8BDCC855CA4 If the battery of the Intelligent Key is almost B of the key port discharged, the guide light * A blinks and the indicator appears on the dot * matrix liquid crystal display. (See "Dot matrix liquid crystal display" in the "2. Instruments and controls" section.) In this case, inserting the Intelligent Key into the A allows you to start the engine. Make port * sure that the key ring side faces backward as illustrated. Insert the Intelligent Key in the port until it is latched and secured. To remove the Intelligent Key from the port, push the ignition switch to the OFF position and pull OFF GUID-F0D3DF80-AF4F-4421-A7D9-6137FEB28588 The engine can be turned off without locking the steering wheel. The ignition lock is designed so that the ignition switch cannot be switched to the LOCK position until the selector lever is moved to the P (Park) position. 5-12 Starting and driving