2012 Nissan Murano Owner's Manual - Page 439

tened to the specification at all times. It is recommended that wheel nuts be tightened to the specification at each tire rotation interval. WARNING . After rotating the tires, check and adjust the tire pressure. . Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.). . Do not include the spare tire or any other small size spare tire in the tire rotation. . For additional information regarding tires, refer to "Important Tire Safety Information" (US) or "Tire Safety Information" (Canada) in the Warranty Information Booklet. SDI1662 SDI1663 CHANGINGGUID-C0E68C99-6D1E-468B-BD60-266B69785593 WHEELS AND TIRES Tire rotation GUID-F64A5784-30E5-4161-A652-802036607CAA NISSAN recommends rotating the tires every 7,500 miles (12,000 km). (See "Flat tire" in the "6. In case of emergency" section for tire replacing procedures.) As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Wheel nut tightening torque: 80 ft-lb (108 N·m) The wheel nuts must be kept tigh- 1. 2. Wear indicator Wear indicator location mark Tire wear and damage GUID-93CD1313-9389-4D39-9BDA-72E38D0D8BA5 WARNING . Tires should be periodically inspected for wear, cracking, bulging or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced. Maintenance and do-it-yourself 8-39