2012 Nissan Murano Owner's Manual - Page 177
2012 Nissan Murano Manual
Page 177 highlights
The hazard flashes 4 times and the outside chime sounds when the lift gate starts closing. mode. A pinch sensor is mounted on each side of the lift gate. If an obstacle is detected by the pinch sensor during power close, the lift gate will reverse and return to the full open position immediately. NOTE: If the pinch sensor is damaged or removed, the power close function will not operate. Reverse function GUID-28EE2E95-2E6D-4231-A853-225C012F131B The power lift gate will reverse immediately if one of the following actions is performed during power open or power close. A on pushing the power lift gate switch * the instrument panel D on the lower . pushing the lift gate switch * part of the lift gate C on . pushing the lift gate button * the Intelligent Key. The outside chime sounds when the lift gate starts to reverse. pushed during power open or close, the power operation will be canceled and the lift gate can be operated manually. . WARNING There is a small distance immediately before the closed position that cannot be detected. Make sure that all passengers keep their hands, etc., clear from the lift gate opening before closing the lift gate. C on the The power lift gate button * Intelligent Key cannot be operated when the ignition switch is in the ON position. Auto reverse GUID-588A601D-27B2-48E9-8FDE-883DF425CE62 function The auto-reverse function enables the lift gate to automatically reverse when something is caught in the lift gate as it is opening or closing. When the control unit detects an obstacle, the lift gate will reverse and return to the full open or full close position. If a second obstacle is detected, the lift gate motion will stop and the drive motor will disengage. The lift gate will enter the manual Manual mode GUID-2D066900-C91C-4239-8B7E-587EF875F5E6 If power operation is not available, the lift gate can be operated manually. Power operation may not be available if multiple obstacles have been detected in a single power cycle or if the battery voltage is low. When the power lift gate main switch is in the OFF position, the lift gate can be opened manually by pushing the lift gate opener switch. If the power lift gate opener switch is Pre-driving checks and adjustments 3-23