2012 Nissan Murano Owner's Manual - Page 66

Position the top tether strap over the top of the seatback. 2. Secure the top tether strap to the tether anchor point on the back of the seatback behind the child restraint. 3. Refer to the appropriate child restraint installation procedure steps in this section before tightening the tether strap. If you have any questions when installing a top tether strap, consult your NISSAN dealer for details. SSS0822 . A booster seat must only be installed in a seating position that has a lap/shoulder belt. BOOSTER SEATS GUID-5C761715-A70E-4E74-8871-BE6A74AC0326 Precautions on booster seats GUID-469816AF-C7E6-4180-AFB1-93AE88597A78 INSTALLING TOP TETHER STRAP (Hardtop models) GUID-10E4B72F-E871-4B10-A99B-9504B51D59C9 First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable. 1. If necessary, raise or remove the headrest to position the top tether strap over the top of the seatback. If the headrest is removed, store it in a secure place. Be sure to reinstall the headrest when the child restraint is removed. See "Adjustable headrest (Hardtop models)" earlier in this section for headrest adjustment, removal and installation information. WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: . Make sure the shoulder portion of the belt is away from the child's face and neck and the lap portion of the belt does not cross the stomach. Make sure the shoulder belt is not behind the child or under the child's arm. . 1-44 Safety - Seats, seat belts and supplemental restraint system