2012 Nissan Murano Owner's Manual - Page 201

Automatic anti-glare type GUID-75561106-D8BE-4E21-A23B-64B84E0A7AC5 The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically turned on when the ignition switch is pushed to the ON position. When the anti-glare system is turned on, the A will illuminate and excessive indicator light * glare from the headlights of the vehicle behind you will be reduced. B to make the Type A: Push the switch * inside rearview mirror operate normally and the indicator light will turn off. Push the switch again to turn the system on. C to make the Type B: Push the "*" switch * inside rearview mirror operate normally. The indicator light will turn off. Push the "I" switch D to turn the system on. * For the HomeLink® Universal Transceiver operation, see "HomeLink® Universal Transceiver" in the "2. Instruments and controls" section. OUTSIDE MIRRORS GUID-EA0119F9-F39F-4DB3-A112-568766B0ECF6 WARNING Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. SPA2319 Adjusting outside mirrors GUID-BDFF896E-E842-4BF3-8D64-FADE035BD4D5 The outside mirror control switch is located on the armrest. The outside mirror will operate only when the ignition switch is in the ACC or ON position. Turn the switch right or left to select the right or 1 , then adjust using the control left side mirror * 2 . switch * Do not allow any object to cover the E sensors * or apply glass cleaner on them. Doing so will reduce the sensitivity of the sensor, resulting in improper operation. For the compass (if so equipped) operation, see "Compass" in the "2. Instruments and controls" section. Pre-driving checks and adjustments 3-47