2012 Nissan Murano Owner's Manual - Page 427

HEADLIGHTS GUID-B7024CBE-4176-4E16-8869-DEBDA14C4A55 Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer. . CAUTION Do not leave the bulb out of the headlight reflector for a long period of time. Dust, moisture, smoke, etc. entering the headlight body may affect bulb performance. High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped. Only touch the plastic base when handling the bulb. Never touch the glass envelope. Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact a NISSAN dealer. SDI2183 Replacing GUID-06D0D99A-DBCB-47EA-BA6E-CE7EB8469ACB If replacement is required, see a NISSAN dealer. Xenon headlight model: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 . WARNING HIGH VOLTAGE When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xenon headlights replaced at a NISSAN dealer. For additional information, see "Headlight and turn signal switch" in the "2. Instruments and controls" section. Halogen headlight model (if so equipped): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. . . Use the same number and wattage as originally installed as shown in the chart. Disconnect the battery negative cable before replacing bulbs. To replace the headlight bulb, if necessary, remove the rubber cover by pulling out the two 1 . clips * A * High-beam bulb Maintenance and do-it-yourself 8-27