3Com 3CBLSG24 User Guide - Page 67
Add Rules to ACL, Device > ACL > IP Based ACL > Setup, Selection ACL, Create ACL, Priority
View all 3Com 3CBLSG24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Defining Access Control Lists 67 To configure IP Based Access Control Lists: 1 Click Device > ACL > IP Based ACL > Setup. The IP Based ACL Setup Page opens: Figure 33 IP Based ACL Setup Page The IP Based ACL Setup Page contains the following fields: ■ Selection ACL - Selects the ACL to be bound. ■ Create ACL - Defines a new user-defined IP based ACL. Add Rules to ACL ■ Priority - Defines the ACL priority. ACLs are checked on the first fit basis. The ACL priority defines the ACL order in the ACL list. ■ Protocol - Indicates the protocol in the ACE to which the packet is matched. The possible fields are: ■ Select from List - Selects a protocol on which ACE can be based. ■ Protocol ID - Adds user-defined protocols by which packets are matched to the ACE. Each protocol has a specific protocol number which is unique. The possible field range is 0-255. ■ Source Port - Indicates the source port that is used for matched packets. Enabled only when TCP or UDP are selected in the Protocol list. The field value is either user defined or Any. If Any is selected the IP based ACL is applied to any source port.