Brother International BAS-760 Instruction Manual - English - Page 14
NB X9 9
View all Brother International BAS-760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2 Bobbin case threading 1. Removal of the bobbin case .m, irttg:ED) BOBBIN CHANGE r START eah FAST I STEP BACK U (1) Press BOBBIN CHANGE button 0 and the machine will move toward you and stop; "U99" will flash on the display. (2) Take out bobbin case 0. Replace the bobbin. After replacing bobbin case @, press BOBBIN CHANGE button 0. The display will show "U99" which has now stopped flashing. (3) Press START button 0). r B99 2. Removal of the bobbin 3. Bobbin case threading 4 1411 N * Bobbin 0 released. can be removed when the latch is (1) Insert the bobbin into the bobbin case. (2) Pass the thread through slot and under adjustment spring®. (3) Pull the thread out from adjustment spring 0. g Bobbin thread winding 4 A 1. Pass the bobbin thread from the spool stand as illustrated below. 2. Wind the thread around the bobbin as arrowed. 3. Press lever 0 against the bobbin. 4. After completing bobbin thread winding, cut the thread. X Check for any idle rotation of the bobbin. The motor may overheat, if the bobbin idles fora long time or if it rotates without a bobbin. At this time, protector @ will go up and the bobbin thread winding motor will not start. If protector 6 is pressed after about 20 seconds has elapsed, bobbin theread winding can be restarted. -11-