Brother International BAS-760 Instruction Manual - English - Page 44
Adding, sewing, operation, before, initial, stitch, programmed, pattern, Reprogramming, shunting,
View all Brother International BAS-760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
ID Adding a sewing operation before an initial sewing stitch in a programmed stitch pattern (1) Turn the power switch to ON. (2) Press the 0 key. The sewing clamp assembly will come down and the displays X, Y and STEP will indicate "0"; command lamp F will come on. 1 (3) Insert the floppy disk containing the program 2 into the floppy disk drive and start reading. 3 4 5 6 (4) Press ten-key (11 and the E key. The needle tip will move to initial stitch position 1. (5) After pressing the 0 key or the E key, use the 7 jog keys to move the needle tip from initial stitch position 1 to a new initial stitch position 1'. After taking a note of the coordinate values (X and Y display readings) and press the 0 key. (6) Use the jog keys and El key to program additional sewing point(s) between positions 1 and 1'. Note: Determine the number of additional sewing points according to the distance from 1' to 1 and the stitch length. (7) Program the number of sewing points for the coordinate values (X and Y display readings). (8) Press theE key to return the sewing clamp assembly to the shunting position. (9) Press the keys M and E. The needle tip will return to initial stitch position 1. (10) Press the 0, 0 and keys in this sequence. The needle tip will move to new initial stitch position 1' and the sewing points will be added before initial sewing position 1. (11) Write the modified program to the floppy disk (refer to page 38). (12) Press the© key and the display will go off. IC E Reprogramming a shunting point before the initial sewing stitch in a programmed stitch pattern (1) Turn the power switch to ON. (2) Press the E key. The sewing clamp assembly will come down and the displays X, Y and STEP will indicate "0"; command lamp [ F ] will come on. 2 (3) Insert the floppy disk containing the program 3 into the floppy disk drive and start reading. 4 5 (4) Press ten-key M and the W key. The needle tip 6 will move to initial stitch position 1. 7 (5) After pressing the [13 key, use the jog keys to move the needle tip to point A (shunting point A ). Take a note of the coordinates values (X and Y display readings) and then press the 0 key. (6) After pressing the E key, use the jog keys to move the needle tip for the distance of the coordinates values (X and Y display readings); then press the El key. (7) Press the keys 0 and E and the needle tip will move from initial stitch position 1 to point A and then to position 1. (8) Press the M and E keys in this sequence. The needle tip will move to point A and the shunting position will be added before initial stitch position 1. (9) Write the modified program to the floppy disk (refer to page 38). (10) Press the© key and the display will go off. -41-