Brother International BAS-760 Instruction Manual - English - Page 29

Programming, Procedures

Get Brother International BAS-760 PDF manuals and user guides View all Brother International BAS-760 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

C PROGRAMMING PROCEDURES Outline the pattern to the actual size. Design the pattern with a maximum stitch length of 6.0 mm. • The maximum number of stitches is 1,000. • The maximum pattern size is 220 mm in the X direction and 250 mm in the Y direction. • There are no limits in establishing the initial stitch position, performing a back stitch operation or the sewing direction. ❑t Preliminary procedure c#' 0 (1) Turn power switch 0 to OFF. (2) Connect programmer plug @ to the connector on the front cover. (3) Turn power switch 0 to ON. The sewing clamp assembly will move in the X and Y feed directions to the sewing origin. (4) Set sewing clamp assembly @ and be sure to insert a piece of material under the assembly. (5) Press the E (program) key. The sewing clamp assembly S will come down and the program mode will be established. X Be sure to connect the programmer to the power source only when the power switch is turned to OFF. Do not disconnect the programmer while programming. If disconnected, erroneous actions will result or programming will be disabled. -26-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
C
PROGRAMMING
PROCEDURES
<Conditions>
Outline
the
pattern
to
the
actual
size.
Design
the
pattern
with
a
maximum
stitch
length
of
6.0
mm.
•
The
maximum
number
of
stitches
is
1,000.
•
The
maximum
pattern
size
is
220
mm
in
the
X
direction
and
250
mm
in
the
Y
direction.
•
There
are
no
limits
in
establishing
the
initial
stitch
position,
performing
a
back
stitch
operation
or
the
sewing
direction.
❑t
Preliminary
procedure
c#'
0
(1)
Turn
power
switch
0
to
OFF.
(2)
Connect
programmer
plug
@
to
the
connector
on
the
front
cover.
(3)
Turn
power
switch
0
to
ON.
The
sewing
clamp
assembly
will
move
in
the
X
and
Y
feed
directions
to
the
sewing
origin.
(4)
Set
sewing
clamp
assembly
@
and
be
sure
to
insert
a
piece
of
material
under
the
assembly.
(5)
Press
the
E
(program)
key.
The
sewing
clamp
assembly
S
will
come
down
and
the
program
mode
will
be
established.
X
Be
sure
to
connect
the
programmer
to
the
power
source
only
when
the
power
switch
is
turned
to
OFF.
Do
not
disconnect
the
programmer
while
programming.
If
disconnected,
erroneous
actions
will
result
or
programming
will
be
disabled.
—26—