Brother International BAS-760 Instruction Manual - English - Page 16
U87, U88, U89
View all Brother International BAS-760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
( SEWING El Preparation for sewing 1. Apply air pressure and turn on power switch. The machine will move to the home position and stop at the shunting position. If an alarm lamp comes on at this time, read the following notes: brother BAB-760 MODE AUTOR YMCA 70/"LMg PROGRAM NO ttfr9 THREAD MOMTOR 01 LABEL 75027 STEP 170 ie I ;IIIt2T STACKER BOBBIN COUNTER 0 not9- XII COUNTER DEC awes SPEED RE MI 7..±...'' POWER TEST TEST 0 x1000 A1tRAM BOSS CHANGE x9 - t I START 0 TAT FAST T.TT. STEP BACK 1 0 0 U C) 72LA - RM CODE ' ERRS -STOP 0of PIECE COUNTER O a X An alarm code for an error message not describing an abnormality can be cancelled by pressing the emergency stop button. X When alarm code, U87, U88, U89, U94 or U95, is displayed, turn the power switch to OFF and then turn it to ON again. In addition, if error codes U94 or U 95 are displayed, move the sewing clamp or the machine head by hand to the normal standby position, and then turn the power back on. If the same alarm code is displayed, a photo sensor, a motor or a PCB may need replacement. The same holds for alarm code U90 also, but if this code is not erased after turning the power back ON again, the reason is probably a malfunction in the solenoid valve or the cylinder sensor. 2. Insert floppy disk O. 3. Match the number of sewing clamp assembly @ and the program number by PROGRAM No. switch ID. Refer to page 48 for the sewing clamp assembly numbers. 4. Press FLOPPY button 0. 5. Make sure that the THREAD MONITOR lamp is on. If the lamp is off, press THREAD MONITOR button to turn it on. . 6. To start sewing with a new bobbin, set the BOBBIN COUNTER switch (5 and press the SET button O 7. Display "0" on the PIECE COUNTER (refer to page 15). 8. Turn SPEED selector® to set the sewing speed. 9. Press STACKER button O to turn it on. -13-