Brother International BAS-760 Instruction Manual - English - Page 25
completion
View all Brother International BAS-760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
ID Emergency stop EM STOP button uses [To stop the machine during sewing] To stop the machine during sewing, press EM STOP button 0. The machine will stop and display "U80". Find the cause of the trouble. b(Other BAS-760 elDgessilie PROGRAM NO ±Wers9 DREAD PONTOS 0O STEP FOOT 0 noOT-oga "W" 4 4 0 (1) L'LL TAV I STEP BACK O Wo- LAD -, 0 £000i5 - ma A IN ma To continue sewing: 1. Press the EM STOP button 0 again for alarm release. U80 will go off after thread trimming. 2. While STEP BACK button @ is being pressed, the needle drop is carried backward. To feed forward after excessive carry-back, press TEST button ® once. The test lamp will come on and feed forward. When the needle reaches the required position to resume sewing, press the button once again; the test lamp will go off. 3. Press START button 0. To return to the shunting position: 1. Press EM STOP button 0 again for the second time for alarm release. U80 will go off after thread trimming. 2. Press EM STOP button 0 for the third time to display U80. 3. Press EM STOP button 0 and then FOLDER RESET button g). The machine will return to the shunting position after locating the origin. [Thread breakage during sewing] *The display will indicate U52 at a thread breakage. The ALARM CODE lamp will come on. brother BAS-760 000,019 PROSE M NO Yee-e9 TREADMONITOR I- 1 4 eeTITSPI 2.9- e START BOSON GANGS 00 U 0 TTASYR-I9 sews COURIER 7.7 S7/1 STEP BACK 1. Press EM STOP button 0 and the machine will stop after thread trimming. The alarm lamp will go off. 2. Pass the upper thread with the thread take-up at its highest position. 3. Press STEP BACK button @ and return to where the thread was broken. 4. Press START button 0. 5. The machine will start sewing and return to the shunting position on completion of sewing. 0 O 0 0 PIECE COUNTER A 0 0 lel la STEP BACK button: Use this button to return to where the thread was broken. TEST button: When using STEP BACK button 0, press TEST button 0 once to move forward after moving backward to far backward. [To fast feed] The forward feeding action will stop when the TEST button is pressed again. Forward feeding: Hold down FAST button (5 while the TEST lamp is on after pressing TEST button 0 forward feeding will then become fast. Reverse feeding: Hold down FAST button ® while STEP BACK button @ is pressed; and the (reverse) feeding will then become fast. -22-